Introducing the AIMS Power 2000 Watt Pure Sine Inverter Charger 24 Volt - the ultimate solution for off-grid, mobile, and emergency backup power needs. This versatile inverter charger is three products in one - an inverter that transforms DC power stored by batteries into AC electricity, a built-in 30 amp transfer switch, and a 30 amp battery charger that uses AC power from the grid or generator.
Equipped with a battery-type selector, this inverter charger helps regulate the voltage provided to the battery bank, maximizing its lifespan and saving you money in the long run. It also features an average 10 millisecond transfer time, making it an uninterrupted power supply when combined with a battery bank. With a surge capability of 6000 watts for 20 seconds and a direct connect terminal block, this industrial-grade unit can withstand surges and power most tools and appliances.
This low frequency inverter is labeled as such due to its lower level of total harmonic distortion compared to modified sine units. This results in a cleaner transfer of energy, increased efficiency, and a quieter performance. The conformal-coated boards make this unit resistant to dust and water vapor, making it ideal for boating applications like powering a stereo system.
Use this inverter charger to power tools on a work truck, appliances in a tiny home, RV, or van life, or for renewable solar, off-grid, mobile, and emergency backup power applications anywhere that uses 110 or 120 volts of alternating current. Its auto frequency detection allows users to operate at either 50 or 60 hertz, and the selectable 25W power save mode (hibernation) ensures efficient use of energy.
As with all AIMS Power inverters, the PICOGLF30W24V120V comes with a 30-day money back guarantee, a one year manufacturer’s warranty, and free technical support. Don't wait any longer to power your off-grid living with AIMS Power. Get the 2000 watt low frequency inverter charger today.
Features:
- 2000 watt low frequency inverter
- 6000 watt surge for 20 seconds 300% surge capability
- Battery priority selector
- AC direct connect terminal Block
- Marine coated and protected
- Multi stage smart charger 30 Amp for gel, AGM, lead and lithium LiFePO4
- Remote panel available
- Auto frequency
- 10msec typical transfer time
- Selectable 25W power save mode (hibernation)
- 7 battery type settings for charger
- Automatic transfer switch
Specifications:
Inverter Output Specifications:
- Continuous Output Power: 2000 Watts
- Surge Rating: 6000 Watts (20 Seconds)
- Output Waveform: Pure Sine/Same as input (Bypass Mode)
- Nominal Efficiency: >88% (Peak)
- Line Mode Efficiency: >95%
- Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
- Typical Transfer Time: 10ms (Max)
- THD: < 10% DC
- Ambient Operating Temperature: 14°F to 122°F (-10°C to 50°C)
Input Specifications:
- Nominal Input Voltage: 24.0Vdc
- Minimum Start Voltage: 20.0Vdc
- Low Battery Alarm: 21.0Vdc-22.0Vdc
- Low battery Trip: 20.0Vdc-21.0Vdc
- High Voltage Alarm: 32.0Vdc
- Low battery Voltage Restart: 26.6Vdc
- Idle Consumption: 26.5 watts
- Power Saver Mode Idle Consumption: 12.2 watts
Charger Specifications:
- Output voltage: Depends on Battery Type
- Charger Rate: 30A
- Over Charge Protection Shutdown 31.4V
- Selectable Charge Setting
- Adjustable Charge Current: off-20%-100%
- Four Stage Smart Charger
Transfer Switch Specifications:
- 30 amp auotmatic transfer switch
- 10 ms (max)
Dimensions:
- Unit Weight: 50 lbs.
- Unit Size L x W x H: 16.48 x 8.74 x 7.1 inches
- Shipping Weight: 53 lbs.
- Shipping L x W x H 23.5 x 13.0 x 12.5 inches
Downloads:
