Introducing the AIMS Power 6000 Watt Pure Sine Power Inverter Charger 48Vdc to 120Vac - the perfect solution for solar power and emergency backup power. With 6000 watts of continuous power and 18,000 watts of surge (for up to 20 seconds), you'll always be prepared for the next power outage.
This inverter is built with a direct-connect terminal block, allowing users to surpass the 6000 watt capacity and harness its 300% surge power (up to 18,000 watts for 20 seconds). And with its 48 volt DC input, it performs with very little power loss, making it an ideal choice for sustainability lovers looking to live as efficiently as possible.
Not only is this inverter incredibly efficient, but it's also versatile. It outputs 120 Vac and can output 50 or 60Hz via the SW4 switch on the DC side, making it operable with nearly any electrical system on the planet.
Built to withstand even the most rugged conditions, this inverter is protected from humidity or dust and dirt by virtue of its marine-coated or "conformal-coated" boards. It also has over-temperature protection and dual thermally-controlled fans to withstand reasonable heat and temperature fluctuations.
This AIMS Power inverter is perfect for nearly any job, from off-grid home and business backup power to mobile and emergency backup power applications anywhere. It comes with a battery priority selector and multi-stage smart charger (80 Amp charges gel, lead, AGM, Lithium) and is repairable, with AIMS Power standing behind it with a free one-year warranty and tech support.
Choose the AIMS Power 6000 Watt Pure Sine Power Inverter Charger 48Vdc to 120Vac for reliable and efficient power in any business or residential emergency backup power applications. Optional 25W power save mode, 10msec typical transfer time, and 7 battery type settings for charger provide even more flexibility and customization for your specific needs.
Features:
- 6000 watt low frequency inverter 110 Vac Single Phase
- 18000 watt surge for 20 seconds -3x surge capability
- Battery priority selector
- AC direct connect terminal block
- Marine coated and protected
- Multi stage smart charger 80 Amp charges gel, lead, AGM, Lithium
- Remote panel available
- 60hz or 50 hz selectable dip switch
- 10msec typical transfer time
- Optional 25W power save mode
- 7 battery type settings for charger
Specifications:
Inverter Output Specifications:
- Continuous Output Power: 6000 Watts
- Surge Rating: 18000 Watts (20 Seconds)
- Output Waveform: Pure Sine/Same as input (Bypass Mode)
- 100-110-120Vac
- Nominal Efficiency: >88% (Peak)
- Line Mode Efficiency: >95%
- Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
- Typical Transfer Time: 10ms (Max)
- THD: < 10% DC
- Ambient Operating temperature: 14°F to 122°F (-10°C to 50°C)
Input Specifications:
- Nominal Input Voltage: 48.0Vdc
- Low Battery Alarm: 42.0Vdc-44.0Vdc
- Low Battery Trip: 40.0Vdc-42.0Vdc
- High Voltage Alarm: 64.0Vdc
- Low Battery Voltage Restart: 53.2Vdc
- Idle Consumption: 4.16 amps DC
- Power Saver Mode Idle Consumption: <0.83 amps DC
Charger Specifications:
- Output voltage: Depends on battery Type
- Charger Rate: 60A
Dimensions:
- Unit Weight: 79 lbs.
- Unit Size L x W x H: 23.5 x 8.5 x 7.0 inches
- Shipping Weight: 84 lbs.
- Shipping L x W x H 30.5 x 14.5 x 13.75 inches
Downloads:
